Many new houses today are being built with increased standards for energy efficiency. But, that can’t be said for more mature homes. The best thing you’re able to do to make your home very energy efficient is to add insulation. This isn’t straightforward to do with the external side walls, but can be done easily with blown-in insulation in the attic. You will notice that your property will be cooler during the summer months and warmer in the winter months. If you live in a very old house, you may just have newspapers in your wall for insulation.

Today, with all of the ecological concerns, insulation has turned into a technology all by itself. Insulating products receive an R-value, and this value must be used to determine the amount of insulation needed, depending on the area of the country you live. Very cold regions require a significantly higher R-value, than places with moderate temperatures. A good choice to reduce heating bills is blown-in insulation. There are many benefits to having blown-in insulation compared to the traditional fiberglass insulation including energy efficiency, how it can be used and installation.

Of the top five reasons for utilizing blown-in insulation, the initial one is that it is adjustable. You can manage the level of insulation you will need thus varying the R-value. Blow in an exact quantity of measured inches to get an R-value of 15, and so much more if you would rather have an R-value of 38. Another benefit for implementing blown-in, is that the majority of products use virgin materials, that have lessened the chance of allergies. Youll also end up with a more effective seal considering that the materials can fill in cracks and crevices. The application is rapid, and given that everything is filled in, it is very energy-efficient.

Newly framed homes will have an easy time putting in blown-in insulation. All that is done is staple a netting over the external wall studs, then cut a number of little holes, stick in the hose, and load up the wall cavity. The insulation substance will stick to the studs and will fill up the insides of the wall. You then envelop the wall with vapor barrier and after that drywall it. To use the ceiling insulating product, you drywall the ceiling first, then climb into the attic area and blow it in. Much more challenging on an older house, because the wall covering will have to be removed first. Following the removal of the wall covering the procedure is just the same. If the dwelling is very old, you can just make a hole in the wall and blow the insulation in, then cover it up.

To begin with, the cost of blow-in insulation is more expensive, but it is much more efficient as an energy saver. With lower power charges and a comfortable home, using blown-in insulation makes the most sense.

Palm Springs Insurance